MASTERLIQUID ML360 SUB-ZERO
The MasterLiquid ML360 Sub-Zero powered by Intel® Cryo Cooling Technology delivers a cooling solution unlike that of your traditional thermal solutions. Allowing the processor to be able to reach higher frequencies at lower voltages due to behavioral characteristics of silicon that can only be achieved through sub-ambient temperatures. Utilizing the unique combination of hardware, software and firmware to push the thermal limitations of your processor.
Specifically designed using Thermoelectric Unit (TEC) to cool your processor and create the conditions that allow it to achieve low core count over-clocking.
Powered by Intel Cryo Cooling Technology
Designed with a simple user interface making it easy to understand and control the sub-ambient cooling potential.
Silicon can reach higher frequencies at lower voltages that can only be achieved through sub-ambient cooling. The concept of Cryo-Clocking is to push the performance of the CPU to reach maximum capacity within the limits.
2nd Generation Pump
Enhanced pump delivers higher liquid flow for exceptional heat removal.
SPECIFICALLY DESIGNED WATER BLOCK
The circuit board features built in sensors for temperature and dew point to help minimize the effects of condensation.
52x52mm TEC unit is built-in to the water block to cool you CPU.
Sensors communicate temperature and humidity conditions back to the system.
This seal maintains steady processing performance, as well as preventing condensation and external elements to protect your system.
IMPROVED AND ENHANCED PUMP
Newly Designed Pump traditionally used in DIY cooling systems with high performance motor that has an enhanced repeller to dissipated heat from the TEC in a more efficiently.
Top Mounted 360 mm Radiator
Front Mounted Pump
To get the best performance for your system for you CPU we recommend a top installation of the 360mm radiator and a front installation of the pump. The fans are pre-installed on the radiator and pump bracket pre-attached (out-of-box).
For more information on compatibility
SETTING UP OVERCLOCKING ON YOUR CPU
|WATERBLOCK DIMENSIONS||89 x 79 x 86.7 mm / 3.5 x 3.1 x 3.4 inch|
|RADIATOR DIMENSIONS||394 x 119.6 x 27.2 mm / 15.5 x 4.7 x 1.1 inch|
|PUMP DIMENSIONS||57.3 x 57.3 x 92.2 mm / 2.3 x 2.3 x 3.6 inch|
|PUMP MTTF||198,000 Hours|
|PUMP NOISE LEVEL||< 35 dBA|
|PUMP RATED VOLTAGE||12 VDC|
|PUMP RATED CURRENT||1.0 A|
|PUMP POWER CONSUMPTION||13.8W (Max)|
|FAN DIMENSIONS (L X W X H)||120 x 120 x 25 mm / 4.7 x 4.7 x 1 inch|
|FAN QUANTITY||3 PCS|
|FAN LED TYPE||Non-LED|
|FAN SPEED||650-1900 RPM ± 10%|
|FAN AIRFLOW||59 CFM (Max)|
|FAN NOISE LEVEL||8 – 26 dBA|
|FAN PRESSURE||2.0 mmH₂O (Max)|
|FAN LIFE EXPECTANCY||160,000 Hours|
|FAN POWER CONNECTOR||4-Pin (PWM)|
|FAN RATED VOLTAGE||12VDC|
|TOTAL POWER CONSUMPTION||200 W|
|COOLER TYPE||Liquid Cooler|